Consider your climate, building type, budget, and design style. Machine press bricks are best for modern facades, handmade for heritage projects, and exposed bricks for industrial aesthetics.
Classic Red for traditional buildings, Multi-tone for character, Dark shades for modern contrast, Yellow for Mediterranean, Hampton for contemporary, and Antique for heritage aesthetics.
Clean brickwork annually with water and mild detergent. Avoid pressure washers on old bricks. Inspect mortar joints every 2-3 years and repoint if needed. Seal bricks in high-moisture areas.
Use cement:sand ratio of 1:4 for standard brickwork. For cladding tiles, use ready-mix brick adhesive. Always match mortar colour to brick shade. Mix in small batches to prevent drying.
For standard bricks (230x110x75mm): approximately 48-50 bricks per square metre with 10mm mortar joints. Add 5-10% extra for wastage and cutting. Contact us for exact project calculations.
In humid regions, choose bricks with low water absorption (under 10%). In earthquake-prone areas, use high compressive strength bricks. For extreme heat, clay bricks provide natural thermal insulation.
Shareable brochures and guides for architects, builders, and homeowners
Step-by-step installation guide with mortar mixing ratios and best practices
View GuideOur brick experts are ready to help with product selection, calculations, and technical guidance
Scan the QR to call
Our team will contact you shortly